How To Prolong The Life Of Your Commercial Boiler

If your commercial building is heated by a boiler, hopefully you’re taking the necessary steps to take care of it. Whereas older boilers were typically built to last for many years without the need for maintenance or replacement, today’s more complex commercial boiler systems are larger, more powerful, and thus require a higher level of care. Specifically, it’s important that you not only take the time to have the boiler inspected by a professional at least once a year, but that you put in the money needed for preventative maintenance and repairs. Here are a few other tips for prolonging the life of your commercial boiler, thus saving you money in the process.

Have Vent Pipes Inspected

Aside from a basic inspection performed by your local HVAC company such as Mercury Tec, it’s also a good idea to have the vent pipe of your commercial boiler looked at; this is not always included in a regular inspection. Specifically, the technician should be on the lookout for white residue, which is often indicative condensation. If signs of excess condensation are present, this needs to be addressed by a professional right away, as condensation can easily corrode the vent pipe and lead to more expensive repairs down the road.

Look at the Flue Passages

You don’t necessarily need to be a boiler or HVAC professional to take a look at your commercial boiler’s flue passages from time to time. The flue passage is easily visible from the outside and should be free of both moisture and soot. If you spot any dark soot or signs of moisture (such as condensation on the sides of the flue), then it’s time to call a professional. These are often signs of insufficient air intake or the system not running hot enough.

Replace Filters as Needed

Finally, if your commercial boiler has make-up air filters, make sure that you replace them regularly. The frequency with which they need to be replaced can vary depending on how often you use your commercial boiler and what type of filter it takes, but you should be replacing them at least a few times a year. You can find filter replacements at your local hardware store and install them yourself; if you’re unsure, contact a professional to have them replaced for you.

These are just a few helpful tips for keeping your commercial boiler running its best. Keep these in mind and don’t forget to schedule that annual inspection!

Learn More

Getting A Job From Truck Drivers Wanted Ads

Have you recently completed a driver’s training program and are looking to apply for your first job? Deciding how to apply for ads that state truck drivers wanted can be tricky. You want to make sure that you stand out, but you also don’t want to make yourself look too unqualified or strange for potential employers. The job market can be tight at times, and changes in the economy can make obtaining truck driving jobs difficult. Fortunately there are some tips that prospective truck drivers can keep in mind when responding to help wanted ads, and when going on the interview.

Meeting Requirements

When an employer has a stack of resumes, one thing that can get yours tossed aside immediately is if you do not meet the requirements. So if a truck drivers wanted ad states that the employer is looking for someone with driving experience, don’t apply for that position if you are a recent graduate. On the opposite side, don’t apply for ads that focus on new graduates if you have been a truck driver for many years.

Also, make sure that you have obtained your CDL before responding to any truck drivers wanted ads. Many companies will want to know up front that you have obtained this license, as doing so will be a condition of employment.

Acing the Interview

Almost as important as your qualifications is how you perform in an interview. This is why preparing in advance is key. Tips for acing a truck driver interview job interview can include:

  • Researching the company: Go in with examples of how you can help the company succeed, and why you want to work for that specific company.
  • Ask about the company’s culture and work environment:  You want to make sure that the company is as good a fit for you as you are for them. Make sure you understand what will be expected of you on a daily basis. You don’t want to take a job where you will be on the road for weeks at a time if you are expecting to have weekends home.
  • Stay on point: One of the easiest things to do in an interview is talk almost too much. Keep your answers to the interviewer’s questions focused on your truck driver training and how it has prepared you for the workforce.
  • Use your past experience: If you have worked in a different field, tie that into how it will help your truck driving career. If you have had a position that required meeting tight deadlines, talk about how that taught you the importance of getting things done on time. This can relate to getting shipments delivered on time, something that will be vital for the company.

Getting a response from a truck drivers wanted ad is only half the battle. Acing the interview is the other half. However, you cannot really control how you will be perceived, and who will offer you a position. So stay positive, and apply to as many truck driver wanted job ads as you qualify for. The right job is out there – it just may take a little time and patience to land it. For more information, contact a company like Twin River Logistics.

Learn More

3 Advantages From Using Variable Frequency Drives

Variable frequency drives have been growing in popularity over the past few years in the fields of industry and manufacturing. This piece of machinery, designed to control an electric motor by changing the amount of energy that the motor gets and the speed at which the motor runs, has allowed industries to increase their efficiency and decrease costs. There are a number of different advantages associated with using a variable frequency drive.

1. Reduce Overall Energy Consumption and Costs

A motor does not need to be used at full capacity all the time. If the motor can’t be controlled, then the extra energy that is being used will be lost. The company using the motor is paying for energy that isn’t actually helping them make money. To reduce this waste, companies can get a variable frequency drive that will run the motor at the exact level that is required, improving overall energy efficiency and decreasing the amount of money that the company has to pay for power.

Reducing the amount of energy used also allows companies to hit certain requirements for energy efficiency provided by the government and receive the corresponding tax benefits or energy rebates. These can drastically improve a company’s profit margin.

2. Increase Production Quality

When the motors that are running the machines are controlled, it reduces the number of errors that the machines make. This improves the quality of each batch of products being made. There is also less jerking or sudden stops when the motor is being controlled, which further decreases the chances that mistakes will be made.

3. Increases Longevity of the Motor

When a motor starts normally, there will be a sudden shock because the entire line starts at the same time with a jerk. With a motor that is controlled by a variable frequency drive, the entire system will start smoothly. This reduces the strain that is put on the motor and will therefore extend its life. This will save the company a great deal of money because it will not have to pay to replace the motor as often, as well as maintain productivity levels. 

By purchasing a variable frequency drive, it is possible for a company to cut energy costs, qualify for energy rebates, increase productivity and quality, and increase the lifespan of its machinery. All of these advantages combine to help a company increase its profit margins and become more successful. Try this site for more information.

Learn More