Air Compressor Maintenance Tips

If you use an air compressor regularly within your industry, maintenance should be done routinely in order to keep it working up to par. Failing to take precautionary steps in maintaining your air compressor could leave you with downtime that could possibly cost the business in lost sales. Here are some steps you can take to make sure the air compressor you use on the job stays working so you do not need to deal with unnecessary repair.

Familiarize Yourself With Parts

When you first start using an air compressor, or if you get a new one to do your job, familiarize yourself with all parts contained within the piece of equipment. The best way to do this is to take a look at the manual that comes with the unit. Reading a paragraph or two the first few weeks that you are getting used to the machine can help you realize what it needs to work properly. Take a look at any charts inside the manual that point out parts that should be cleaned or replaced on a regular schedule. 

Clean Out The Compressor

Cleaning can keep any piece of machinery working longer, as it will remove any debris that could get embedded within the mechanisms needed to run the equipment. In an air compressor, there are a few portions to take special care to check and clean.

Clean the intake vents out every few weeks using a shop vacuum. These vents can become clogged with dust particles, sand paper, or other materials you use in your industry. If the vents stay clogged, the machine has a harder time working, putting strain on the unit in general. Routinely clean down the hoses using a mild detergent. This will help you find any areas where cracks may be prevalent so you can switch out the hoses with new ones. 

Switch Out Parts

Change the air filter in your air compressor every six months to avoid a build up of dust inside. Failing to change out the filter every six months can cause your machine to have trouble drawing in air, making it overheat if it is overused. Change the gas in your fuel tank at least once a year so you do not have a sludgy build-up adhering to the interior walls of the tank. A wet/dry shop vacuum cleaner can be used to remove any gas remnants.

Tighten Bolts And Release Moisture

Tighten the nuts and bolts on your air compressor every week or two. With regular use, air compressors will shake, causing these hardware pieces to loosen. To keep your air compressor intact, tightening is recommended.

Release the moisture from your air compressor every few weeks, as well. When you use an air compressor, moisture will build up inside the tank. Release some of the air from your tank using the valve as listed in your manual. This will release the pressure of the air and will let out some of the moisture in the process. Tighten the valve again after you have let some of the moisture free.

Pop over to this web-site to learn more about air compressor maintenance. 

Learn More