How To Install A CO2 System In Your Home Bar

The holidays are a time for family and friends to gather to reconnect and share precious moments. This can also be a time when you get to show-off your beer-making skills. If you have taken the time and effort to store your beer in kegs, you will need a system in place to dispense it through the taps and into the glasses. This is where a CO2 system comes in handy – the gas forces the beer out of the keg and into your glass. Here is how you can build your own CO2 system.

Equipment You Will Need from places like Terry Supply Co:

  • Refrigeration Unit
  • Vinyl tubing
  • Pressure regulator
  • CO2 tank
  • Hose clamps
  • Tap disconnect
  • Drill
  • Sheet Metal Drill Bit

Refrigeration Unit

A refrigeration unit is needed to keep your beer cold. An old refrigerator works fine if you don’t want to spend the money on a new unit. You will need to drill a hole in the door to connect your tap to the beer lines inside the refrigerator – avoid drilling into the sides of the refrigerator as you could release the coolant keeping the refrigerator cold. Use a sheet metal bit to open a hole just big enough to slide your tap line through it.

Vinyl Tubing

Vinyl tubing is needed to supply CO2 to the keg and to move the beer from the keg to the tap. You will want to purchase tubing that is designed for use with beer such as thermoplastic vinyl tubing that has been approved for use in breweries to keep your beer fresh and tasting good.

CO2 Tank

A CO2 tank is needed to store the gas that helps keep your beer fresh, and to provide the pressure to move your beer from the keg to the tap. A pressure regulator is screwed on to the tank to regulate CO2 usage.

Pressure Regulator

A double-gauge regulator allows you to monitor the amount of CO2 pressure is entering the keg – which affects how well the beer pours out of the tap. The pressure should be set to between 10 and 13 psi to pour a good glass of beer. The vinyl tubing runs from the CO2 tank to the tap disconnect on top of the keg, and another line runs from the tap disconnect to the tap you’ve placed on the door. The tubing is held into place with hose clamps.

All you have to do at this point is open the CO2 valve to get pressure moving into the tank so you can pour you and your guests a nice glass of beer while sitting around making new memories during the holiday season.

Learn More

How To Prolong The Life Of Your Commercial Boiler

If your commercial building is heated by a boiler, hopefully you’re taking the necessary steps to take care of it. Whereas older boilers were typically built to last for many years without the need for maintenance or replacement, today’s more complex commercial boiler systems are larger, more powerful, and thus require a higher level of care. Specifically, it’s important that you not only take the time to have the boiler inspected by a professional at least once a year, but that you put in the money needed for preventative maintenance and repairs. Here are a few other tips for prolonging the life of your commercial boiler, thus saving you money in the process.

Have Vent Pipes Inspected

Aside from a basic inspection performed by your local HVAC company such as Mercury Tec, it’s also a good idea to have the vent pipe of your commercial boiler looked at; this is not always included in a regular inspection. Specifically, the technician should be on the lookout for white residue, which is often indicative condensation. If signs of excess condensation are present, this needs to be addressed by a professional right away, as condensation can easily corrode the vent pipe and lead to more expensive repairs down the road.

Look at the Flue Passages

You don’t necessarily need to be a boiler or HVAC professional to take a look at your commercial boiler’s flue passages from time to time. The flue passage is easily visible from the outside and should be free of both moisture and soot. If you spot any dark soot or signs of moisture (such as condensation on the sides of the flue), then it’s time to call a professional. These are often signs of insufficient air intake or the system not running hot enough.

Replace Filters as Needed

Finally, if your commercial boiler has make-up air filters, make sure that you replace them regularly. The frequency with which they need to be replaced can vary depending on how often you use your commercial boiler and what type of filter it takes, but you should be replacing them at least a few times a year. You can find filter replacements at your local hardware store and install them yourself; if you’re unsure, contact a professional to have them replaced for you.

These are just a few helpful tips for keeping your commercial boiler running its best. Keep these in mind and don’t forget to schedule that annual inspection!

Learn More

Getting A Job From Truck Drivers Wanted Ads

Have you recently completed a driver’s training program and are looking to apply for your first job? Deciding how to apply for ads that state truck drivers wanted can be tricky. You want to make sure that you stand out, but you also don’t want to make yourself look too unqualified or strange for potential employers. The job market can be tight at times, and changes in the economy can make obtaining truck driving jobs difficult. Fortunately there are some tips that prospective truck drivers can keep in mind when responding to help wanted ads, and when going on the interview.

Meeting Requirements

When an employer has a stack of resumes, one thing that can get yours tossed aside immediately is if you do not meet the requirements. So if a truck drivers wanted ad states that the employer is looking for someone with driving experience, don’t apply for that position if you are a recent graduate. On the opposite side, don’t apply for ads that focus on new graduates if you have been a truck driver for many years.

Also, make sure that you have obtained your CDL before responding to any truck drivers wanted ads. Many companies will want to know up front that you have obtained this license, as doing so will be a condition of employment.

Acing the Interview

Almost as important as your qualifications is how you perform in an interview. This is why preparing in advance is key. Tips for acing a truck driver interview job interview can include:

  • Researching the company: Go in with examples of how you can help the company succeed, and why you want to work for that specific company.
  • Ask about the company’s culture and work environment:  You want to make sure that the company is as good a fit for you as you are for them. Make sure you understand what will be expected of you on a daily basis. You don’t want to take a job where you will be on the road for weeks at a time if you are expecting to have weekends home.
  • Stay on point: One of the easiest things to do in an interview is talk almost too much. Keep your answers to the interviewer’s questions focused on your truck driver training and how it has prepared you for the workforce.
  • Use your past experience: If you have worked in a different field, tie that into how it will help your truck driving career. If you have had a position that required meeting tight deadlines, talk about how that taught you the importance of getting things done on time. This can relate to getting shipments delivered on time, something that will be vital for the company.

Getting a response from a truck drivers wanted ad is only half the battle. Acing the interview is the other half. However, you cannot really control how you will be perceived, and who will offer you a position. So stay positive, and apply to as many truck driver wanted job ads as you qualify for. The right job is out there – it just may take a little time and patience to land it. For more information, contact a company like Twin River Logistics.

Learn More